Cable hanging systems should be the lightboxes that we use most. It is also called float art& galley hanging systems, great to showcase your latest information ,special promotions,it isa stylish way to advertise your business and make a perfect promotion tool.

So these wire cable hanging systems are widely used in estate agencies ,shopping mall ,travel agencies ,beauty salon ,hotel, restaurant and company offices etc.

Many people like these stunning and modern cable hanging system ,but there are some customer don’t know how to install these cable hanging system.

Here ,we simply tell you the instruction as follows:

Firstly. As each unit of light panel has one piece of yellow page ,which is mainly protect the light panel from scratching and finger or duty ,so you should tear off the yellow page.

Secondly: For each set of light box ,we have stainless steel hardware, which is used to grip the side of these frames tightly,so that the light panel wouldn’t drop off the cable line.Of course ,each set of light panel has 4 cut-off ,which need to be installed 4 units of hardware ., install these two wire cable onto the ceiling and leave them down

Secondly: There are 8units of small bolt for each set of light box.. You can firstly use the “L ”shape metal tool to screw these 4 bolts into the stainless steel hardware. The small bolts are not only used to fasten the hardware but also it place the role of conduction between the light panel and the cable hanging line.

Thirdly: after you install the light panel well ,then lift it up between these two cable hanging line , put the cable hanging line into the hardware ,then the cable hanging line would be grasped by the light panel, so now the light panel can float in the air ,but it is not safe and stable.

Fourthly: since the light panel is just grasp by the wire hanging in the air ,but it is not stable .,dangerous . So we would also screw another 4 unit of bolts into the hardware ,then lock the hardware and wire hanging tightly. After this ,the light box are hanging between the wire hanging stably . Then like this ,one by one.

Lastly: Connect the adapt . Usually ,each set of cable hanging system would have one unit of adapt. Turn on the light ,then the whole light panel would be illuminated .

If you want to change the graphics ,for normal cable hanging system ,it is standoff style ,so you need to put down each light panel and unscrew the bolt . It may be troublesome and time-consumption . And also we have magnetic panel style . You don’t need to put down the light panel. Since the front panel is sandwiched by magnetic bolt onto the LGP ,so you just slide out the front panel ,then replace the poster ,graphics ,it just take seconds ,very easily and convenient .

 Usually, the wire hanging line can stand up to 100kgs ,but in consideration of safety and stability ,it would be advisable for us to hang 3 units ,4 units for each column ,of course 5 units are ok, but it is too heavy ,the circuit is not stable.